2.4ghz Not Working But 5ghz Is

RobotPoweredHome is reader-supported. When yous buy through links on my blog, I may earn an affiliate committee. As an Amazon Acquaintance, I earn from qualifying purchases.

I have set my network to automatically connect my smart devices around the dwelling house and devices that are far away to the two.4 GHz ring of my dual-band router.

Devices that are closer and usually utilise more data like my gaming console, TV, and calculator, connect to the 5 GHz.

The same is the case for my phone and laptop which automatically change betwixt 2.iv GHz and 5 GHz bands depending on the distance from the router as I motion around the home.

Only as of tardily, my connexion with the 2.4 GHz band has been pretty patchy, and virtually of the time, my devices won't fifty-fifty connect to the Wi-Fi.

Without Wi-Fi's convenience, work would be difficult to complete on time, and so I went online to discover out why this was happening.

I hoped to find something that would fix this result one time and for all and bring my router dorsum to seamlessly switching between 2.4 and 5 GHz Wi-Fi.

After a few hours of inquiry that comprised reading forum posts and router documentation, I was ready with a few fixes that I knew could piece of work.

I tried them on my router and my devices and managed to get information technology to work in just a few minutes.

This commodity compiles everything I found and should assist you connect to the 2.four GHz network again.

If your device can't connect to your ii.iv GHz Wi-Fi band, check your device settings and make sure information technology's set to connect to the 2.4 GHz ring. Yous tin also update your router and your device and restart or reset the router.

Find out afterward in this article how you tin update your router's firmware and why keeping your device updated and on the latest software is important.

Check Device Settings

Some devices have a setting that, when turned on, won't connect to ii.4 GHz Wi-Fi networks.

The characteristic might have been intended to maximize the device's performance on Wi-Fi by using just 5 GHz, but it doesn't permit you connect to the slower ii.4 GHz band.

Bank check your device settings to see if your device has the aforementioned or similar setting, and turn it off for the moment.

Try connecting the device to the 2.4 GHz access point at present and meet if you lot can complete the connexion.

Update Your Device

Equally your device's software is beingness worked on, the developers will launch updates and patches for it every once in a while.

These patches iron out bugs and other issues that might take afflicted the device's performance.

Bugs cause devices to not connect to Wi-Fi networks and the 1 that you lot may have stopped your device from specifically connecting to the 2.four GHz band.

This is why it's pretty important to continue your devices updated and on the latest version of patches and problems fixes.

Check for updates to your devices and install them as before long as possible.

After your device is updated, try connecting the device to the two.4 GHz band once again.

Update Router Firmware

The same logic applies to your router, merely getting it updated is a bit dissimilar from updating your other devices.

Routers commonly update their firmware instead of software considering routers use software that ameliorate interfaces with its hardware.

To update your router's firmware:

Become to your router'south support website.
Cheque for firmware updates to your router model and download information technology to your calculator.
Open a new browser tab.
Type 192.168.i.i in the address bar and hit Enter.
Log in to your router. Yous can find the default login details on a sticker underneath the router.
Go to the Assistants department. If it isn't present, yous can refer to your router'southward manual for the exact section that you'll need to get.
Upload the file you simply downloaded to the router.
Outset the firmware update.
The router will restart after the firmware update completes.

Try connecting your devices to the two.4 GHz access point again to see if the update worked.

Restart Your Router

If a router firmware update didn't work, and neither did a device update, you can try restarting your router to encounter if that helps.

Restarts human activity as a soft reset and take been seen to gear up quite a few bugs with many routers.

The best mode to practise this would exist a ability cycle, so follow the steps below to practice so:

Turn the router off.
Unplug it from the wall.
Plug information technology dorsum in simply after waiting at to the lowest degree one minute.
Plow the router dorsum on.

Later the router turns on, connect the device to the two.four GHz access point.

You tin can try this a couple more times if information technology doesn't work the first time.

Reset Your Router

If a restart doesn't work, the next logical step to take is to factory reset the router.

This volition wipe all settings, including your custom Wi-Fi name, QoS settings, and restore the Wi-Fi password to defaults.

Only do this if yous're prepared to set everything up again from scratch.

To reset your router:

Find the push button labeled 'Reset' on the back of the router. It should be recessed and look like a pinhole.
Get a paperclip or something non-metallic and pointy to press the button.
Printing and hold the button for at to the lowest degree 30 seconds with the tool.
The router will restart, and when it comes back on, the process has been completed.

Try connecting a device to the 2.4 GHz band of the router afterwards setting it upwards to see if the reset worked.

Contact Support

If none of these troubleshooting steps works out for you lot, please contact your router'southward technical support.

For routers that you've leased from your Internet service provider, information technology'south better to contact your ISP instead.

They guide yous through additional steps and might inquire you to send it to them if they can't fix information technology over the telephone.

Terminal Thoughts

ii.4 GHz is well-nigh used exclusively for the range advantage that it has over 5 GHz, and because of costs, most smart abode devices also use only ii.iv GHz Wi-Fi.

If your dual-ring router has reliability bug with 2.4 GHz, consider getting a unmarried ring 2.four GHz router, and use the dual-band router for 5 GHz Wi-Fi.

I would recommend the ASUS N300 single-band router if you lot desire a skillful 2.four GHz router.

Interference won't be much of an result if you identify your router strategically.

Y'all May As well Enjoy Reading

Can't Connect To 5GHz Wi-Fi: How To Set up In Seconds
Why is My Wi-Fi Bespeak Weak Suddenly
Xfinity Wi-Fi Connected But No Net Access: How To Fix
Ethernet Slower than Wi-Fi: How to Set in Seconds

Frequently Asked Questions

How practice I change my Wi-Fi frequency?

You demand to have a dual-band router to change your Wi-Fi frequency.

These dual-band routers usually testify as 2 access points on devices that support both Wi-Fi bands.

Connect to the access betoken, which has v in the name for that band or ii.four for the 2.iv GHz band.

Tin can I force my phone to use 2.four GHz?

To forcefulness your phone to utilise two.four GHz, connect to the 2.four GHz access point and make the phone forget the v GHz AP.

Tap and agree the 5 GHz access indicate and forget the network.

Does iPhone utilise 2.4 GHz or 5GHz?

All iPhones from the 12 and newer have support for both ii.4 and 5 GHz Wi-Fi.

Older models don't have back up considering they don't have the required hardware.

Should I use different SSIDs for 2.four and 5Ghz?

Your router already uses a slightly different SSID for both bands, but to brand your life easier and identify the bands, you tin change the SSID to anything you wish.

Source: https://robotpoweredhome.com/cant-connect-to-2-4-ghz-wifi/